Thanks for buying the Nuheara IQ stream TV personal audio streamer. When first unboxing, check you have all the items in the box. You will have six items. The IQ stream TV, a USB power cable, an optical audio cable with adapter, the 3.5 auxiliary cable, and the RCA adapter cable. If you are missing any of these items, please contact us at [email protected].
Connecting to power. Take the USB cable and plug it into the USB port on the IQ stream. Take the other end of the USB cable and plug it into your TV. The USB ports could be located on the left, the bottom, the right, or the back of the TV.
If your TV does not have any USB ports, please use a readily available USB wall charger. Keep the IQ stream close to your TV, as you will need to connect other cables for audio. If connected to the TV, your IQ stream will be powered on when the TV is on. When powered up for the first time, the light on the front will flash white.
Connecting to audio. IQ stream TV is equipped with both digital and analog audio connections. For the best audio experience, we recommend using the optical digital connection wherever possible. Some older TV shows do not have a digital optical port. In this case, you will need to use the analog cables to connect your IQ stream.
For analog audio connections, you will need two cables. The 3.5 auxiliary cable and the RCA adapter cable. Take the green end of the auxiliary cable and plug it into the import on the IQ stream TV. Take the other end of the auxiliary cable and connect it with the RCA cable.
You’ll now need to locate the matching ports on the back of your TV. Look for the red and white ports that match the RCA cable ends. Most importantly, make sure the ports are labeled audio out other red and white ports may not work.
Connecting to the app. Once the IQ stream is connected, you may connect your IQ buds to your phone or tablet and open the Nuheara app. Your IQ Buds Boost will require the latest firmware for use with IQ stream TV. Ensure this is installed on your IQ buds before you begin. You can download the installer from the address on the screen.
When your IQ Buds Boost are connected to your phone, you will receive a pop up message requesting you to tap your phone on the IQ stream. Hold your phone or tablet on the IQ stream until you see connected. If you didn’t see this pop up, you may need to update your app. Go to the app store your phone or tablet to do this.
Choose a name for your IQ stream. Whatever room you’re in is a great name to use. Your IQ stream is now ready for use. You will land on a screen that says you are streaming audio from your phone. Below this will be a list of your connected devices, and you will see the archive stream with the name you just gave it. If it doesn’t show up, please give it a few seconds.
Tap the IQ stream you just named and allow it a few seconds to connect. You will then see a screen where you can control your own TV volume through your IQ Buds Boost. You can turn the volume up or down or mute it. It’s important to note that this will only change the volume of what you’re hearing through your IQ Buds, not the external TV itself.
When you want to listen to music or media from your phone or take phone calls, open the stream source list again and select the name of your phone.
